Posts tagged Signals

LECTURE: Broadcast Technology

0

Today we looked at timecode with a substitute lecturer, the lecture today wasn’t very successful as they were trying to teach us directly from Martin’s note without reading over them before. We have been told to expect thatMartin’s absence will be for sometime, this could affect more of our BT lectures as well as our TV Systems and Signals Lectures, as he is our main course leader.

 

Today’s lecture was quite mismatched as he was just reading from the notes, and explaining the bits we did not understand, this still didn’t give us the full reason / story behind timecode and why we use it. I feel they could have gone into more depth on how it works technically and why its so crucial.

LECTURE: TV Systems and Signals

0

Today we looked at satellites and how the play a key role in the world of broadcasting as well as the rest of the communication and location markets. The Astra group of satellites are the main group in operation for Broadcasting use in Europe.

LECTURE: TV Systems & Signals

0

Today, has been an eventful day mainly due to the snow that has been falling constantly for the last 24 hours. This morning there was only a light dusting of snow on the ground, so I risked it and went to uni as usual, no problems getting in. It was whilst I was at uni, things started to go bad. The snow just kept falling and falling, which i knew was bad right from the start, even though it wasn’t settling at North Greenwich.

This morning we had a practical tv systems and signals lecture with John Palmer. We looked into termination of video signals, and why it was important. which was an interesting lecture. and it surprised alot of us, how much the signal changed based on if it was terminate or unterminated.

At the end of this lecture, the snow was still falling and I was now dreading trying to get home.

Another Electronics Practical in the afternoon, and the snow was still falling, by this time, my dad had phoned me to say we now had nearly a foot at Petts Wood, and that it will be hard trying to get home.

I finally left uni at 5pm, and got to Lewisham via the Jubilee Line and DLR with no Problems. Lewisham had still only 2-3 inches of snow and trains were running ok, into London. MY train arrived about 10-minuets late and was said to be fast to Orpington, which was fine for me, just meant a slightly longer walk back.

We Pulled out of Lewisham and moved slowly down to Hither Green, where we stopped and the opened the doors. This wouldn’t have happened if we had been the true fast service that they had said in Lewisham. We had stopped because there were 5 other trains in front of us trying to reach the South East, all being blocked by one train that had broken down at Petts Wood.

After 3 hours of very slow moving and long waits at stations we finally made it to Petts Wood, the snow is in deed over a foot deep, and there are only two lines out of the usual 4 the could just about be used. Walking back from Petts wood station was just as dangerous, with next to no grip on the compacted snow.

I don’t think, I’ll be going to uni anytime soon.

CIRCUS: AVID and Patching

0

AVID

Avid, Avid, Avid, where do I begin, It’s hard to say I liked it, because I didn’t, and the truth be told I don’t think I will be finding much time to edit using it. It’s handy to know the basics and it’s little quirks with the Rave MAM System. This little bits of knowledge will help me troubleshoot problems with the software if required, at a later date.

Patching

Patching was an interesting, yet small session, aim at teaching me on how to route signals around the ravensbourne building. There’s not much more than that i can say about it.

LECTURE: Electronics and TV Systems and Signals

0

Electronics

Continuing on from the basics we learnt in the first few lectures, we moved on to some basic analogue circuits, including creating a Hi-pass and Low-Pass filter. These filters are both very simple, yet they provide crucial functionality in many everyday appliances. A good example of this is the Phone it has a 3KHz Hi-Pass Filter in it, creating the distinctive sound you hear. A Mid-Pass Filter is another extremely common one, particularly in broadcasting. Used mainly in TV tuners, to decipher one signal from the next. They are used for this purpose as they can be set to allow a very small frequency range through at a time, useful for splitting the hundreds of signals sent over FreeView.

TV Systems & Signals

TV Systems and Signals, was unfortunately canceled today due to unforeseen circumstances.

Go to Top