Posts tagged Location
The 3D Storytelling conference is over for another year and has once again been an enjoyable yet stressful experience. This years conference I (Tom) was in charge of the event’s lighting, which entailed transforming buildings bland look and creating a cinema / main lecture space, which is subtitle for 3D screenings as well as live broadcasted keynotes.
The event itself was on the 22nd and 23rd of march and consisted of a few main spaces. These main spaces were the Primary Lecture Space, this also doubled as a realD Cinema, an Exhibition Space on Level 4, a Secondary Lecture room in 212/213 and a 3D Games room in 209/10.
Way-finding for the event was assisted by colour coding the individual floors, with the same or similar colours being used on the banners and event guides. This involved gel’ing nearly 300 separate lamps ranging from standard florescent tubes to small circle spots, this itself took nearly 2 day’s on and off between 4 people. But the effect achieved, certainly enhanced the buildings character as well as completed the objective to make way-finding as easy as possible.
Along with colour coding each floor I decided to stick with the theme of colour and light the Ground Floor and Level 4 atrium walls, this was achieved with some success, through the use of 4 Studio Due, City Colours per floor. During the day these were fairly effective at colouring the walls with certain colours working a lot better than others, mainly due to the sun and the great big white tent across the road, called The O2, both helping to wash out the efforts of the City Colours. The ground floor atrium’s city colours were also used during the after event networking and this is where they really performed and brought the building to life.
I also used two Clay Paky Alpha Spot 1200HPE’s per floor to provide a break up to the solid wall of colour. This could have been very effective with a little bit more programming and timing between all fixtures. The lack of time partially came from the 1/2 day it took to get the Clay Paky’s up and running, due to a simple fault/menu which prohibited the lamp from fully striking, once this was solved they individually outperformed 2 or more of the City Colours, and were very easy fixtures to use and program.
The Alpha Spots and City Colours, were two new fixtures for me and this event was the first time I had used either of them. We had some initial trouble positioning the City colours due to there planned location (Level 4 Balcony) being designated a fire lane and a new location being sought rapidly to cover the same wall. The new compromised location’s were on Level 1 and Mezz in 3 spread out locations. This caused a few focus issues, but the final results was better than originally planned with the new positions uplighting the wall, creating a far better look from the ground floor, which originally would have been quite shadowy with all the deep circle windows.
The Walker Space, which was the main Lecture space and realD Cinema, used a completely generic rig consisting of pars, pups, and source 4’s. The main goal was to provide a dark theatre like space that kept in theme with the ground floor of the building. The walls were washed pink and originally had a slightly darker pink break-up on top. Due to complaints of inadequate light from the hospitality team the breakups were refocused from the walls onto the seating and the gel was removed, this provided some speckled white light in the room between lectures.
Overall I’m fairly happy with the outcome of this project however there is a lot I would change such as:
- More audience lighting in the Walker Space
- 1k’s or Strand Coda Floods for the wall wash
- Checking Gel’s before purchase, from swatch and not relying on the Lee Filter’s Website
- Possibly Top Hat’s on the Source 4’s to stop glare for the presenters
- Black Wrap or Source 4’s as backlight to remove the spill onto the realD screen
- Lighting columns or spot locations by day and whole walls by night
- Having more time to program and adjust programming
3D Storytelling is one of the biggest events of the year at Ravensbourne. The event is totally different from any other that is run within Ravensbourne as it is headed up by the events team and is run by a select group of students. This year Russell Fleming and Myself took on all of the events logistics and rigging with Tom Glover creating the lighting design. The event features around the fact that there is a RealD Projector in the walker space that allows speakers from different companies to show off there work to the rest of the 3D television and film industry. This gives the students a platform to network with people form within industry as nearly 1000 delegates turn up across the 2 day event.
My role for 3D storytelling was as head of rigging and logistics, Russell was head of event technology and logistics, both of us have these roles for Ravensbourne 2012. The main rigging requirements for this event were to light the walker space for the keynote speeches, light the building to give it a different look and feel and put power distribution on the 4th floor for the exhibition.
To start with I worked out the power requirements for the exhibition going off a floor plan with 22 stalls on it. This time I decided to use the 125 Amp 3Phase on level 5 and split it down to 2 63 Amp 3Phase’s as we had some high power lights for the architectural lighting. The distro’s that we went with were 125A 3P to 2 x 63A 3P and 2 x 63A 3P to 18 x 16A. This meant that I had more than enough outputs for all of the lighting requirements and if all of the stalls were used. We also made the decision to cut the 4 way extensions down to 2 as it was felt that they only need 2 sockets per stall.
For the lighting side of the rigging Tom had asked for 4 city colour washes to go on level 7 and 4 to go on level 4 along with 2 Clay Paky 1200 spots to go at each location. The Clay Paky’s on level 7 had to be hung to get good coverage on the wall. Originally I wanted to hang them off a truss rigged to the RSJ’s above level 9 but as we did not have a load testing certificate to say what load they could take health and safety did not like the idea. I then decided to put them on 2 wind up stands on the 7th floor. The lighting for the main atrium was originally going to go on the 4th floor but was deemed to be in the fire lane and had to be moved when once it had been put in place. We had to move it to the 1st floor/Mezz which actually created some nicer angles and gave a really nice look on the final night when the networking was taking place in the welcome space. All of these lights were sitting on 3ft high deck so that the metal grill under the railing did not get in the way.
In the walker space we felt that we had to do something different from what had been done before in that space. We ended up dead hanging a scaff bar and putting par cans up for a wash of colour along with source 4’s with gobo break ups in them, for once no movers were used. This all ran of the house dimmer pack saving a lot of money and time.
The biggest challenge that Russell and myself had in the planning stage of this event was where to put a Telegenic OB truck. This is a major problem as the outside of Ravensbourne is not designed to have a truck of this size sitting there for over 2 days. This caused major problems right up until the last minute as every location that we chose there was something causing a problem. In the end we got parked it down the side of Rave. I feel proud at the amount of contacts that Russell and myself made out of this event, some of which involved people that generally students don’t even know about. I also made sure that I did not make the same mistakes that I made at penrose market. The logistics generally ran very smoothly with no major problems. This is due to the time and care that Russell and myself put in and the communication with the management of the event. I have to give a big thank you to the second rigging team as they managed to gel over 250 florescent lights around Rave to change the colour of the building.
For Penrose Market I was allocated the job role of head rigger. The tasks that I was to undertake in this role was to come up with a power plan for both the market on the ground floor and on level 4 of Ravensbourne. The reasoning behind doing this, even though there is already plenty of power in the floor boxes, is to make sure that there are enough power sockets for each stall and to give us greater control over the power that is being used on each phase of electricity.
When I was given the original list of the power requirements from Russell I nearly jumped out of my skin, as there was 103 stalls that required power across both the ground and 4th floor. This was going to be the biggest power distribution system I have every designed. To start with I need to work out what power was required on which floor, this meant going through all of the original requirements that Russell had put together and working out where each stall was placed on the floor plans. I worked out that there was 30 stalls on level 4 and 73 on level 0 requiring power. I then looked at the best distribution system for the 2 locations and made the choice to use the 63 Amp 3 phase on level 7 to power level 4 and the 125 Amp 3 phase that is in the OB point out the back of the walker space to power level 0.
My original concept for level 4 was to have a short cable going from the socket to the distro and then use soca to run the distance down the side of the balcony to the stalls on the 4th floor. In the end I decided against this as it was going to massively increase the cost of soca and getting a longer length of 63 amp cable was working out much cheaper. This also meant less mess of cables on the 4th floor and a quicker rig time, as we only had to drop 1 cable over the balcony from level 7 to 4. Level 0 kept to the original design as I had to run at least 10M of 125 Amp 3 phase cable from the OB just to get to the back door of the walker space.
The distro that I decided to go with for the 4th floor was 63A 3Phase to 18 x 13A/15A and 16A sockets. This was chosen as each output of 13A/15A/16A all have a 16A RCOB protecting the users. As I had decided to put the distro on the 4th floor, it was not really necessary to use soca as the distances were short. This meant just running 16A out to each location with a 4 way extension on the end. To make up the 30 stalls I had to work out the load calculations for each stall and put the smallest power consumers on 16A splitters, most of the stalls were just running laptops or monitors in the end so the power draw is very minimal. For the walker space I chose to use a similar distro 125A 3Phase to 36 x 13A/15A/16A sockets. This also has 16A RCOB’s protecting each group of outlets. For the longer runs out into the welcome space on level 0 I planned to use soca for this as it made life much easier to rig and de-rig. In close proximity to the distro I just planned to patch straight into the distro.
The main issue that I had during the planning stage of this event was the budget. The engineers in total only had £2500 to spend and just for power distribution I needed nearly £1500 in the end. I do feel after doing this event that I can come up with a better distribution design that will come in rather cheaper and be much less cluttered than the one that I created for Penrose.
On the actual rig day there were rather quite a lot of issues that I need to address for next time. I felt that as this was my first main event where I was the boss I should have been a bit louder and told people where to be and what to do as things were not getting done quick enough. The 4th floor should have only taken a couple of hours to rig with the amount of crew that I had, but it took most of the day. I had also made an amateur mistake in not double checking the hire quote against what I had asked for as not all of the cable that I had requested was on the quote and did not turn up. I ended up having to go to stage electrics to pick up more. I had also made the silly mistake of trying to do too much in taking on a nightshift at my part time job and running the rigging during the day. I had to leave at 8.30pm and we had barley started the ground floor power, I should have been there. This meant that the following day I was in bed resting while my team did all of the snagging. I was there for the de-rig however and that we managed to do in about an hour which was not bad going.
Today we looked at satellites and how the play a key role in the world of broadcasting as well as the rest of the communication and location markets. The Astra group of satellites are the main group in operation for Broadcasting use in Europe.