Posts tagged Tom Glover
3D Storytelling 2012
3D Storytelling is one of the biggest events of the year at Ravensbourne. The event is totally different from any other that is run within Ravensbourne as it is headed up by the events team and is run by a select group of students. This year Russell Fleming and Myself took on all of the events logistics and rigging with Tom Glover creating the lighting design. The event features around the fact that there is a RealD Projector in the walker space that allows speakers from different companies to show off there work to the rest of the 3D television and film industry. This gives the students a platform to network with people form within industry as nearly 1000 delegates turn up across the 2 day event.
My role for 3D storytelling was as head of rigging and logistics, Russell was head of event technology and logistics, both of us have these roles for Ravensbourne 2012. The main rigging requirements for this event were to light the walker space for the keynote speeches, light the building to give it a different look and feel and put power distribution on the 4th floor for the exhibition.
To start with I worked out the power requirements for the exhibition going off a floor plan with 22 stalls on it. This time I decided to use the 125 Amp 3Phase on level 5 and split it down to 2 63 Amp 3Phase’s as we had some high power lights for the architectural lighting. The distro’s that we went with were 125A 3P to 2 x 63A 3P and 2 x 63A 3P to 18 x 16A. This meant that I had more than enough outputs for all of the lighting requirements and if all of the stalls were used. We also made the decision to cut the 4 way extensions down to 2 as it was felt that they only need 2 sockets per stall.
For the lighting side of the rigging Tom had asked for 4 city colour washes to go on level 7 and 4 to go on level 4 along with 2 Clay Paky 1200 spots to go at each location. The Clay Paky’s on level 7 had to be hung to get good coverage on the wall. Originally I wanted to hang them off a truss rigged to the RSJ’s above level 9 but as we did not have a load testing certificate to say what load they could take health and safety did not like the idea. I then decided to put them on 2 wind up stands on the 7th floor. The lighting for the main atrium was originally going to go on the 4th floor but was deemed to be in the fire lane and had to be moved when once it had been put in place. We had to move it to the 1st floor/Mezz which actually created some nicer angles and gave a really nice look on the final night when the networking was taking place in the welcome space. All of these lights were sitting on 3ft high deck so that the metal grill under the railing did not get in the way.
In the walker space we felt that we had to do something different from what had been done before in that space. We ended up dead hanging a scaff bar and putting par cans up for a wash of colour along with source 4’s with gobo break ups in them, for once no movers were used. This all ran of the house dimmer pack saving a lot of money and time.
The biggest challenge that Russell and myself had in the planning stage of this event was where to put a Telegenic OB truck. This is a major problem as the outside of Ravensbourne is not designed to have a truck of this size sitting there for over 2 days. This caused major problems right up until the last minute as every location that we chose there was something causing a problem. In the end we got parked it down the side of Rave. I feel proud at the amount of contacts that Russell and myself made out of this event, some of which involved people that generally students don’t even know about. I also made sure that I did not make the same mistakes that I made at penrose market. The logistics generally ran very smoothly with no major problems. This is due to the time and care that Russell and myself put in and the communication with the management of the event. I have to give a big thank you to the second rigging team as they managed to gel over 250 florescent lights around Rave to change the colour of the building.
Rave Live 2012 – Tom Glover
Welcome to my sub-blog about Rave Live 2012, or what ever it will finally be called this year. Today we started the project and looked into what is required for us to be sucessfull in the unit as well as the LIVE broadcast in mid-june 2012.
Today we found out we will actually be working towards two events, one test event in November 2011 and the other main event in June 2012. We also decided on our roles for the events, I 1/2 decided and was 1/2 allocated the Head of Interactive Media, which mainly entails creating IP Steams, Social Media and other cool interactive items.
My first big challenge is going to be getting my head around IP Streams and hows they integrate with HTML and the rest of the Broadcast Transmission Chain.
Today I started playing around with Quicktime Broadcaster for Mac OS X and my inbuilt iSight Webcam as the live video source. Thing started off smoothly, until my mac crashed. I did manage to get a low quality stream to Quicktime to my Windows PC but this was very limited in performance Maxing out at 15frames per second and for only short bursts (10-15 Seconds before crashing the Mac), which made it pretty useless.
Initial Todo List for the November Event
- Look into other Encoders and Streaming Servers
- Look into what is already available at Rave to Stream
- Look into how to link into the Rave Transmission Chain
- Create a Dynamic Website with Customised Content, by the Exhibitors
- Link Social Media into the Website
- Combine the Stream and the Website
- Possibly add mobile compatible Website/Stream.